6 Tips for Proper Antenna Alignment


Proper antenna alignment procedures can help you pull a signal in an urban or rural area effectively and efficiently. The process of setting up and mounting a typical antenna product in order to achieve professional results is easy, and you can tackle an entire alignment routine within a few hours by following a several simple steps.

Pinpoint the Local Towers

All locations in rural and urban areas have towers for televisions that generate signals. By pinpointing where these towers are placed, you can simplify the antenna mounting and alignment process. This task should be done before you buy an antenna because you’ll need the signal specs in order to determine how much power you’ll need to pull a strong signal from the nearest tower.

Many companies have apps that compile information about tower locations in various areas. In order to get the calculations for your location, you’ll need to give an app your residential information. Then, after the app calculates everything, you’ll get information about towers in your area and map directions.

Place the Antenna Near a Window

When there are obstructions in the path where an antenna pulls a signal, the antenna’s overall strength will be affected. The most common obstruction that lowers signal strength is a thick wall because the layered lumber interferes with the frequencies. If a wall is made of brick materials, signal strength will drop dramatically since brick is very thick and dense. The easiest way to avoid signal interfere problems around thick walls is by placing an indoor antenna near a window. However, you must mount the antenna strategically in this spot in order to avoid harsh UV rays that could possibly harm the housing on an antenna.

Mount the Antenna in a High Spot

Because television signals move throughout an environment above the ground, you must mount your antenna in the highest possible spot in order to boost signal strength. Besides the roof, you could also place an antenna in an attic.

Avoid Metal Structures

Metal buildings and other structures with steel components can block a signal that travels to an antenna. If you mount your antenna above these obstacles, you get a reliable signal.

Test Various Placements

By relocating your antenna to different spots, you can pinpoint the best spots where there is a strong signal. Antenna alignment tests are typically done in rural areas that are surrounded by many trees.

Consider the Weather

If your community gets severe weather, you must buy a durable antenna with a solid frame. An antenna that’s designed for intense conditions won’t realign when heavy rain and intense wind impact an area.